The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long # SP-210275 you were looking at do have well made eye holes and are compatible with bronze bushings and wet bolts.
You will need bronze bushings with an 11/16" O.D. like the # K71-291-00.
I included videos for the products mentioned for you to take a look at. view full answer...
The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K you were looking at are pre-greased with a Lithium complex, multipurpose grease. When repacking the bearings in the future you will want to make sure you use grease that is compatible with this grease so I recommend using the LubriMatic Multi-Purpose Lithium Grease # L11316 with bearing packer # PTW1218.
I included videos for each of the products mentioned for you to take a look at. view full answer...
I tried to look up what tire size your trailer would have came with but wasn't able to find that listed. One site said 14 inch diameter wheel but I am not totally sure. If you could get back to me with the size you have listed on your sidewall I can give you our best recommendation.
A really common size wheel for toy hauler is 15 inch so most likely that's what you'd have. For that I'd recommend the Karrier part # AM10303 as this is a size ST225/75R15 has a speed rating of 81 mph and... view full answer...
With those measurements in mind and the fact that your camper has a Gross Vehicle Weight Rating (total max weight of camper, gear and water loaded) of almost 9,000 lbs you have one solid choice.
Using the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles part # e78SR offers the 25 1/4" eye to eye you want and uses the same 9/16" bolt size.
These springs are rated for 3,000 lbs. each so in total they will give you 12,000 lbs. of capacity. Now your camper is only rated for 8,940 ish... view full answer...
Go To Results